LDJ Tax Credit Certification

Click below to view and download the LDJ A-Maize-Ing Heat Tax Credit Certification for upto $1,500.

Click To View Certification

Polls

What type of fuel did you use to heat your home last winter?
 

Who's Online

We have 13 guests online
Furnace Specifications PDF Print E-mail
Written by Fred Buser   
Thursday, 09 August 2007

 

Image
Fan Center/Thermostat Connections
The LDJ A-Maize-Ing Heat furnace operates just like any other natural gas, LP or fuel oil furnace.  The burn system on the furnace is controlled by the thermostat in your home.  When there is a call for heat, the augers feed fuel to the burn pot.  When the heat exchanger reaches temperature, the room air blower operates to heat the home.  When the thermostat is satisfied, the augers shut down and the system goes into low idle fire mode.

The furnace is made as a stand alone system, but it can be connected into the plenum of your existing furnace as well.  Each LDJ furnace is equipped with a 3 speed, 1/2 hp room air blower to force air throughout your home.  Plus, each system is ready to operate your air conditioning during the summer months.  There is no additional wiring required.

To ensure proper operation and functionality, the LDJ A-Maize-Ing Heat furnace must be professionally installed by an HVAC contractor or certified dealer.  Improper installation can cause inadequate heating and possible heat exchanger failure.  If you or your installer have any questions about installing an LDJ furnace, please contact our technical department.

 

Technical Furnace Specifications

Model 620-9 620-10
Power120 Volt120 volt
Max Fuse Size15 amp15 amp
UL ListedYesYes
Dimensions53"H x 27"W x 46" D53"H x 27"W x 46" D
Weight440 lbs
440 lbs
Hopper Dimensions48"H x 36"W x 52"D48"H x 36"W x 52"D
Hopper Capacity14 bushel14 bushel
Hopper Weight50 lbs50 lbs
Unit Space Needed7' x 7' Area 7' x 7' Area 
Heat ExchangerWelded SteelWelded Steel
Water CapacityNANA
   
Top Clearance32"32"
Side Clearance6"6"
Rear Clearance18"18"
Front Clearance30"30"
Bottom SurfaceMust set on a non
combustible surface 
Must set on a non
combustible surface 
   
Flue Connection6"Φ6"Φ
Min Flue Clearance18"18"
Flue MaterialMust be 6" round
black chimney Pipe
Must be 6" round
black chimney Pipe
ChimneyMust be 6" round
Class A All Fuel
Must be 6" round
Class A All Fuel
   
Air Filter20x20x120x20x1
Supply Air Opening18"x 14"18"x 14"
Return Air Opening18"x 14"18"x 14"
Minimum Air Flow Required 850 cfm1400 cfm
Indoor Blower1/2 HP 3 Speed1/2 HP 3 Speed
   
Input BTU100,000 btu*80,000 - 165,000 btu
   *Manually Adjustable Variable btu Timer
Last Updated ( Friday, 10 October 2008 )
 
< Prev   Next >

Financing Available

UL Listed Biomass Furnaces and Boilers